Products
IND-200 LOAD AND DISPLACEMENT PANEL INDICATOR
MAIN FEATURES
- Size : 144x72x175 mm
- Power supply could be 230VAC (Terminals 1 & 2) or 24VDC (Terminals 3 & 4)
- Two input signals : Pulse Encoder and Load signal ( from weight Load Cell or 4-20 Ma or 0-5VDC Pressure transmitter) .
- Built in Pressure Transmitter power supply 24 VDC.
- Easy to configure.
- 4-key membrane keyboard
IND-200 is a Digital Indicator has been developed specifically for the display of measured values from two separate variable signals :-
- LOAD in Tons or KGs , from a load cell , two wire 4-20 mA , 0-5VDC pressure transmitter .
- DISPLACEMENT , in micrometer generated from a pulse encoder.
Thus, as an alternative, transmitters with current or voltage signals can be connected on the same instrument.
Using the 24VDC outgoing power supply terminals in the Indicator for the 4-20 mA transmitter current loop transmitter (2-wire) as well as for the 0-5VDC (3-wire) transmitter.
IND-200 Indicator offers possibility of Automatic Zero Offset adjustment for correcting zero offsets and sensor drift.
IND-200 Calibration is very easy , it can be done by zero (NO LOAD) adjustment and any known weight .
For Load Cell , Theoretical calibration could be done simply without any load.
IND-200 is provided with a PEAK TEST facility mainly used to indicate the highest measured Load and displacement during the Test.
Displacement to be measured after a load is sensed by the indicator. And that to prevent unmissably readings and errors.
All configuration and programming can be carried out through the four front-panel Push Buttons
