Products
IND-T – PANEL MOUNT INDICATOR
MAIN FEATURES
- 6 Digits display
- Size : 144x72x175 mm
- Power supply could be 230VAC (Terminals 1 & 2) or 24VDC (Terminals 3 & 4)
- Freely-selectable input: 4 … 20 mA , 0 – 5 VDC or 0 – 10 VDC
- Built in transmitter power supply 24 VDC.
- Programmable minimum and maximum values
- 2 freely-programmable Alarm Relay outputs (Optional)
- 4-key membrane keyboard.
IND-T Digital Indicator has been developed specifically for the display of measured values from process transmitters, such as pressure, temperature, and Differential Pressure transmitters.
It offers various input configurations for 4 – 20 mA, 0 – 5 VDC, and 0 – 10 VDC standard signals, which can be selected through an internal selector DIP switch and through the Indicator configuration.
Thus, as an alternative, transmitters with current or voltage signals can be connected on the same instrument.
Using the 24VDC outgoing power supply terminals in the Indicator, 4-20 mA transmitter current loop transmitter (2-wire) as well 0-5VDC or 0-10VDC (3-wire) transmitter can be operated.
Two-alarm outputs AL1 and AL2 are also available. Alarm Setpoint, direction (Alarm Hi or Alarm Low), and Alarm Dead band can be simply configured.
IND-T Indicator offers the possibility of Automatic Zero Offset adjustment for correcting zero offsets and sensor drift.
Sensor calibration and linearization of up to 1500 points make it a very accurate and unique indicator.
IND-T is provided with a PEAK testing facility mainly used to check the highest / lowest measuring signal during the Test.
All configuration and programming can be carried out through the front-panel Push Buttons
